- Support the +5V PCI bus for PIO-D48
- Support the +3.3/+5 V PCI bus for PIO-D48U/D48SU
- Supports PCI Express x 1 for PEX-D48
- 48 channels of digital I/O
- Bi-direction programmable I/O ports under software control
- All I/O lines buffered on the board
- Six 8-bit bi-direction I/O ports
- SMD, short card
- Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R,
DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards. - One 32-bit programmable internal timer
- One DB37 connector and one 50-pin box header for PIO-D48U/PEX-D48
- One SCSI II 100-pin connector for PIO-D48SU
- One 16-bit event counter
- Interrupt source: 4-channel
- Card ID function for PIO-D48SU/D48U/PEX-D48
- Pull-up or pull-down resistors on I/O lines
- Emulate two industrial-standard 8255 PPI ports (mode 0)
- Buffer output for higher driving capability
- DIO response time is about 0.77 μs (1.3 MHz max.) for PIO-D48U/D48SU
- DIO response time is about 500 kHz for PEX-D48
- Output status readback
PEX-D48
The PEX-D48 supports PCI Express bus. This card provides 48 TTL digital I/O lines, and these lines are grouped into six 8-bit bi-direction ports. Every three 8-bit ports are grouped as port A (PA), port B (PB) and port C (PC) on a connector, and the port C can be split into 2 nibble-wide(4-bit) parts. All ports are configured as inputs upon power-up or reset.
The PEX-D48 also adds a Card ID switch and pull-high/ pull-low resisters for DI on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PEX-D48 cards in one computer. The pull-high/ pull-low resisters allow the DI status to be specified when the DI channels are unconnected; the DI status will remain in high or low status other than floating.
PEX-D48 CR: PCI Express , 48-channel DIO board (RoHS)
- ICP DAS